About usContactPlDeRuEnLt

Other paraffin products


Other paraffin products are used in various industries.  

 

Protective wax JAW-1 (briquettes, liquid)

 No.  Indicator           Standard                               Specification               
1 Colour, Saybolt            ASTM D156 ASTM D1500 -10.0 2.0
2 Melting temperature, °C, min. - 55.0
3 Density at 20°C, g/cm3, min. - 0.810
4 Kinematic viscosity, mm2/s - 4.5 - 7.5
5 Refractive index at 70°C, max. - 1.4600
6 Water mass content, % - Traces
7 Mechanical impurities content, %, max.     - 0.006

 

Ceresin (briquettes, liquid)

 No.  Indicator           Standard                            Specification                   
1 Colour, Saybolt               ASTM D156 ASTM D1500  -16.0 4.8
2 Melting temperature, °C, min. - 75.0 - 80.0
3 Penetration at 25°C, 0.1 mm, max. - 18
4 Mechanical impurities content, %, max.     - 0.02
5 Water mass content, % - None
6 Ash mass content, %, max. - 0.02
7 Acid number, Mg KOH/1 g, max. - 0.06
8 Water-soluble acids andalkalis content, %      - None

 

Crude paraffin (liquid)

 No.  Indicator           Standard                             Specification                     
1 Colour, Saybolt              ASTM D156 ASTM D1500   -16.0 2.8
2 Melting temperature, °C, min.                             - 30.0
3 Oil lubricant content, % ASTM D721 8.00 - 40.00
4 Kinematic viscosity, mm2/s - 4.5 - 7.5

 

Paraffin softener JAPP (briquettes, liquid)

 No.  Indicator         Specification        
1 Appearance        The crystalline mass. Tints from light brown to dark brown are permissible     
2 Pour point, °C, min. 60.0
3 Acid number, Mg KOH/1 g, max. 0.05
4 Sulfur mass fraction, %, max. 0.3
5 Water-soluble acids andalkalis content, % None
    6     Water mass content, % Traces
7 Mechanical impurities content, %, max.                             0.1

 

Petrolatum-1 (briquettes, liquid)

 No.  Indicator                                           Specification                                           
1 Colour, Saybolt            Light brown
2 Pour point, °C, min. 60.0
3 Kinematic viscosity at 70°C, mm2/s, min.   12.00
4 Oil lubricant content, % 4.5 - 7.5
5 Melting temperature, °C, min.           65.0
6 Water mass content, %, max. 0.2
7 Sulfur mass fraction, %, max. 0.25
8 Mechanical impurities content, %, max.   0.05
9 Flashpoint, °C, min.   200

 

Petrolatum-2 (briquettes, liquid)

 No.  Indicator                                              Specification                                        
1 Colour, Saybolt            Light brown
2 Pour point, °C, min. 58.0
3 Acid number, Mg KOH/1 g, max. 0.1
4 Water-soluble acids andalkalis content, % None
5 Water mass content, %, max. 1.0
6 Sulfur mass fraction, %, max. 1.0
7 Mechanical impurities content, %, max.   0.05
8 Phenol content None
9 Flashpoint, °C, min.   220
10 Penetration, 0.1 mm, max. 70